Award Ribbon Best of Home Advisor 2017 and 2018 Winner
Calendar Icon

Mon-Sat: 8am - 4pm
24hr Emergency Service

Winter is coming, and your furnace is going to be your best friend for the next couple of months. If you are a resident of Vancouver, WA, prepare for average daily temperatures as low as 36°F in January. So if you have a gas furnace Vancouver at home, it’s time you start getting it ready for the unforgiving winters up ahead.

Most people don’t worry about furnace maintenance until winter’s here, and by then, it’s too late. A furnace that’s been ignored all year round is likely to give trouble when you need it the most, and getting it repaired in the middle of harsh winter weather will cost you more than usual. It might mean that your family will have to do without central heating for a couple of days at least.

That’s why it’s never a good idea to leave the furnace to the last when preparing your home for winter. So here’s a quick guide to what you need to do.

Top Tips To Getting Your Furnace Ready

Chances are that your heating equipment remains dormant throughout the year until it gets cold outside. If you haven’t invested in its regular upkeep, don’t expect it to jump straight into action the minute it gets cold outside. That’s why it’s essential to prepare your furnaces ahead of the winter season by scheduling a HVAC service in Vancouver, WA. There are regular maintenance items that  you can do at home without the need of a service professional.  Here are some tried-and-tested tips to help you do this right:

1. Turn Up Your Thermostat

Check your thermostat first thing when preparing your gas furnace Vancouver for cold winter nights. Switching over from cooling to heating after almost ten months could require you to do some fine-tuning.

Switch your thermostat to heating, slowly turn up the temperature above the current room temperature, and closely listen to your furnace. If everything is in order, you should be able to hear the heating kick in. However, if that doesn’t happen, something might be wrong with your furnace, so it may be good to call for professional help.

2. Change The Filter

Most people overlook filter changes until it’s too late, and they are left dealing with contaminated air and a furnace that doesn’t function optimally. That’s why you need to change your furnace’s filter ahead of the winter. Filters protect harmful particles from entering your house, and failure to change it can clog up your system. It can even damage the system, which is why you should always get the filter changed regularly to avoid expensive repairs. During a furnace maintenance Vancouver, the service technician will switch out your filter if it’s needed.

gas furnace Vancouver; furnace maintenance Vancouver; hvac service Vancouver wa

3. Inspect Your Heat Exchanger

Your heat exchanger gives life to your gas furnace Vancouver. That’s why it’s a good idea to have a professional clean and service the heat exchanger regularly to prolong the life of your equipment. Besides, negligence can result in leakage of carbon monoxide gas – a health hazard that can jeopardize the well-being of the entire family.

4. Check The Outside Condenser

The outer unit is exposed to rain, snow, icicles, storms, and other destructive forces of nature. So make sure it’s fit to function before you turn the heater on. Make sure the area around your outdoor condenser unit Is clear of leaves and debris so air flow isn’t blocked or hindered.

5. Check Your Vents

Dirty vents bring dust and pollution into the house. This makes it essential to clean them out for your gas furnace Vancouver to blow clean, warm air into your home before the winters arrive. Apart from protecting against contamination, a clean vent promotes the flow of warm air from the furnace without any obstruction. Another essential aspect to consider is to keep the vents exposed to let the air escape. Most people have their ducts in the floorboards. Do not block the vent with any furniture to have your furnace perform optimally.

6. Inspect the Ignitor Switch

Old furnaces have a pilot light that lets you know when you should turn them on. But modern furnaces only take a push of a button. Either way, it’s a good idea to get the ignitor switch inspected before winter arrives. If your ignitor switch is not working, try resetting it. If the problem persists, there is probably an electrical issue. Check the breakers to see if they are working and if everything else is in order and the ignitor switch still fails to work; call a technician to check the wiring and ignitor switch for your furnace.

7. Prepare Your Home

Your furnace is not the only thing that needs servicing before winter. Preparing your home for the winters is just as important as preparing your furnace. For starters, seal all the windows and doors to keep warm air from escaping the home. Next, extend the same effort to ensure that your home is fully insulated.

8. Let The Experts Handle It All

If you live in Vancouver or surrounding areas, an HVAC service provider can look at your system and complete a furnace maintenance Vancouver. An experienced HVAC technician has the necessary expertise to inspect your furnace thoroughly and clean and maintain it during an HVAC service in Vancouver, WA. They also check for damaged coils, ensure pressure and airflow is up to par, and visually inspect the exchanger.

Conclusion

Prepare your HVAC system for the winters so you can enjoy some cozy warmth on cold winter nights. Fall and spring are the best time to get furnace maintenance Vancouver. That’s because the weather is moderate, making it easy to alleviate any inconvenience during the upkeep. If you are looking for a fast, reliable, and professional HVAC service in Vancouver, WA then Miller’s Heating is the best option for you. Call us today to learn more about our services.

Contact a Miller's Heating & Air Expert

Leave a Reply

Your email address will not be published. Required fields are marked *