Miller’s Heating & Air in Vancouver, WA Offers Emergency Heating System Repair
The furnace and heating system is essential to a modern home, especially in the Pacific Northwest, where winters are wet, snowy, and frigid. The role of the furnace is to keep your home at a comfortable, healthy temperature. When it’s working properly, the furnace usually flies under the radar, reliably turning on and off as needed.
But when the heating system stops working, it can constitute an emergency. In freezing temperatures, a home without heat is susceptible to burst pipes and water damage. For its residents, no heat can lead to illness and even death from exposure.
When you need emergency heating repair, you need an HVAC company that is prompt, trustworthy, and that offers 24/7 emergency furnace service. For emergency furnace repair in Vancouver, WA, Miller’s Heating & Air is that company.
5 Common Causes Of Furnace Breakdowns
Has your heating system stopped working? You may be wondering what caused the breakdown. Here are some of the most common causes of furnace breakdowns:
- Malfunctioning thermostat: The thermostat is responsible for measuring the temperature inside the house and controlling the furnace’s power cycles. If your furnace is not turning on or is staying on too long, the thermostat could be the issue.
- Gas supply problem: Natural gas furnaces will stop working if the supply is interrupted. This could be due to the gas being shut off completely, or to a leak or blockage in the fuel line leading to the furnace.
- Faulty ignition sensor: A dirty ignition sensor will not ignite when it’s supposed to. This part can be cleaned, but if it’s faulty, it may need to be replaced.
- Electrical problem: Even gas furnaces require electricity to turn on and off, so a problem with the electrical connections or wires can cause the furnace to not work.
- Blower motor breakdown: Air is forced through the ducts by a blower fan, which is in turn powered by a motor. This motor can stop working if it is dirty, needs to be lubricated, or is old.
If you are faced with a furnace breakdown, call Miller’s Heating & Air for furnace repair Vancouver, WA.
How To Prevent A Furnace Breakdown
The best way to deal with a furnace breakdown is to prevent one from happening in the first place. Nobody wants to deal with the inconvenience and discomfort of a broken furnace, or the hassle of calling around for emergency furnace service. To make sure that doesn’t happen to you and your family, have your heating system routinely maintained.
- Replace the filter: A clogged filter can dramatically reduce the amount of hot air being delivered throughout your home, making it seem like the furnace is not working. In truth, the furnace is probably working extra hard. Replacing the filter often throughout the winter season will reduce stress to the motor and keep dirt out of the furnace.
- Have the ducts cleaned: Cleaning the ductwork will go one step further in preventing dust, dirt, and debris from collecting inside your heating system. Not only will this lead to better indoor air quality, but it will result in a longer life for your furnace, too.
- Get routine tune-ups: A furnace tune-up is your heating system’s version of a health checkup. A certified HVAC technician will clean, lubricate, and inspect your furnace and whole home heating system. For best results, this should be done once a year.
- Keep vents clear: Your heating system needs to intake fresh air to work properly, as well as exhaust smoke and fumes from burning fuel. These intake and exhaust vents, located outside the home, should be kept clear of debris including fallen sticks and leaves, as well as snow and ice.
- Replace your old furnace: Residential furnaces typically last only 15 years; up to 20 if they are well-maintained. Like all appliances, they don’t last forever. If your furnace is old, it may be time to consider replacing it with a more reliable energy-efficient model. This will save you money in repairs and maintenance, as well as on your utility bills.
To schedule routine furnace service or heating repair in Vancouver, WA, call Miller’s Heating & Air.
10 Signs Your Furnace Needs Repair
Not every emergency furnace breakdown is totally unexpected. There are often signs that a furnace is about to quit working. If you learn to recognize these signs that your furnace needs repair, you could save yourself from needing emergency furnace service.
- Poor indoor air quality
- Reduced airflow from vents
- Cold or lukewarm air blowing from vents
- Hotspots or cold spots throughout the home
- Loud, unusual noises, such as thumping, banging, or screeching
- Discolored or flickering pilot light
- Frequent power cycles
- Foul odors
- Unexplained spikes in utility bills
- Inability to keep the home at set temperature
If you recognize one or more of these signs, you may need furnace repair in Vancouver, WA. Call a local, experienced HVAC company, such as Miller’s Heating & Air, for help.
Call Miller’s Heating & Air For Reliable Furnace Repair in Vancouver, WA
With over 70 years in the industry, Miller’s Heating & Air is top choice for furnace repair Vancouver, WA. Not only do they specialize in furnace service, they also offer duct cleaning, duct sealing, air conditioner service, furnace tune-ups, emergency heating system repair, and more. For affordable, friendly HVAC solutions you can trust, call Miller’s Heating & Air.